• No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
• On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork ( Deluxe).
• Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
• 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
• Full support for OneShot ESCs for easy PID tuning and a sharper response.
• Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
• Dedicated output for programmable LEDs - great for orientation, racing and night flying.
• Dedicated I2C port for connection of OLED display without needing flight battery.
• Battery monitoring ports for voltage and current.
• Sonar support for precision low-altitude hold.
• Buzzer port for audible warnings and notifications.
• Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
• Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
• Barometer mounted on the bottom of the board for easy wind isolation.
• Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
• Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
•Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.
- Product Description
It based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU.
The SPRacingF3 gives you all the features you need for the heart of your aircraft, whether you’re into FPV racing,acrobatic flying or aerial photography it’s perfect.
Model Number: SP Pro Racing F3
Remote Control Peripherals/Devices: Motor
RC Parts & Accs: Connectors/Wiring
Upgrade Parts/Accessories: Adapter
Available in Acro and Deluxe versions
Acro: Standard model for racing/acro flying.
Deluxe: Additional sensors for altitude and direction.
36x36mm board with 30.5mm mounting holes.
High-Capacity Flash (Acro and Deluxe)
MS5611 barometer (Deluxe only)
HMC5883 compass (Deluxe only)
4x 4pin JST-SH sockets (I2C, SWD, 2xUART)
2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
8x 3pin though-holes for pin headers for ESC/Servo connections.
2x 4pin though-holes for pin headers for 2x serial ports.
2x 2pin though-holes for pin headers for battery voltage and buzzer.
1 x F3 Flight Controller Board w/ shell
ACRO (6 DOF) is the version without compass and brano
Deluxe version (10 DOF) is the version with compass and brano
- Additional Information
Name Pro SP Racing F3 Flight Controller Acro 6 DOF 10DOF Free Shipping No UPC 717760736321