- Product Description
- Cool Design: 100% Aluminum Alloy material, easy to conduct heat and wear. The shell body with stripes design to help the motherboard cool down.
- Good Heat Dissipation: Built-in four heat-conducting columns (with four 3W thermal tapes) plus dual cooling fan, quickly and effectively solve the heating problem of Pi 4B motherboard.
- Accurate Slot Size: Shell slot and port size designed to be accurate and the open design ensures that wifi/Bluetooth signal transmission is not affected.
- Easily Access to Use: Access To All Consumer Ports And GSI, Camera And Gpio Connectors. Interfaces such as GPIO, CSI, DSI, POE, and 40 Pins are reserved, which does not prevent other uses.
- Support Raspberry Pi Model: Specially designed for Raspberry Pi 4 Model B (Raspberry Pi 4 Model B is NOT Included).
Double Cooling System
Double Cooling System Details
SunFounder Raspberry Pi 4 Case Only special for Raspberry Pi 4 Board. This Dual Fan Aluminum Heatsink Case is made of Aluminum Alloy Material, Portable& Accurate slot size, Provide Good Heat Dissipation for raspberry pi 4 board only. It comes with 4 thermal pads to provide thermal contact between the CPU and top case, and a handy allen key and set of hex bolts to attach the case together.
Dual Fan Design
Specifications for Dual FanOutline Dimension: 25×25×07MM
Rated Voltage: DC 5V
Operating Voltage Range: DC3.5V～DC5.5V
Starting Voltage: DC3.5V
Rated Current: 0.08A±0.01A
Lock Rotor Current: 0.50A
Rated Power Consumption: 0.4W±0.1W
Air Flow: 6.21CFM
Static Pressure: 1.22MMH2O
Life Expectancy: 30000h
Rotating Direction: CCW
Multiple Interfaces Design
Multiple Interfaces for Raspberry Pi 4B
SunFounder Raspberry Pi 4 Aluminum Case gives you access to all of the ports, pins, and connectors. Such as GPIO, CSI, DSI, POE, and 40 Pins are reserved, which does not prevent other uses.Shell slot and port size designed to be accurate and the open design ensures that wifi/Bluetooth signal transmission is not affected.
Package List1 x Aluminum Alloy Cooling Case
1 x Dual Cooling Fan
4 x 3W Silicone Pads(different size)
14 x M2.5*10 Screws
1 X Screwdriver
1 X Installation Manual
Note: Make sure that your Pi is powered off and unplugged before you fit the case.