- Cool Design: 100% Aluminum Alloy material, easy to conduct heat and wear. The shell body with stripes design to help the motherboard cool down.
- Good Heat Dissipation: Built-in four heat-conducting columns (with four 3W thermal tapes) plus dual cooling fan, quickly and effectively solve the heating problem of Pi 4B motherboard.
- Accurate Slot Size: Shell slot and port size designed to be accurate and the open design ensures that wifi/Bluetooth signal transmission is not affected.
- Easily Access to Use: Access To All Consumer Ports And GSI, Camera And Gpio Connectors. Interfaces such as GPIO, CSI, DSI, POE, and 40 Pins are reserved, which does not prevent other uses.
- Support Raspberry Pi Model: Specially designed for Raspberry Pi 4 Model B (Raspberry Pi 4 Model B is NOT Included).
Double Cooling System
Double Cooling System Details
SunFounder Raspberry Pi 4 Case Only special for Raspberry Pi 4 Board. This Dual Fan Aluminum Heatsink Case is made of Aluminum Alloy Material, Portable& Accurate slot size, Provide Good Heat Dissipation for raspberry pi 4 board only. It comes with 4 thermal pads to provide thermal contact between the CPU and top case, and a handy allen key and set of hex bolts to attach the case together.
Dual Fan Design
Specifications for Dual Fan
- Outline Dimension: 25×25×07MM
- Rated Voltage: DC 5V
- Operating Voltage Range: DC3.5V～DC5.5V
- Starting Voltage: DC3.5V
- Rated Current: 0.08A±0.01A
- Lock Rotor Current: 0.50A
- Rated Power Consumption: 0.4W±0.1W
- Speed: 7500R.P.M.±10
- Air Flow: 6.21CFM
- Static Pressure: 1.22MMH2O
- Noise: 19.28dB(A)
- Life Expectancy: 30000h
- Rotating Direction: CCW
Multiple Interfaces Design
Multiple Interfaces for Raspberry Pi 4B
SunFounder Raspberry Pi 4 Aluminum Case gives you access to all of the ports, pins, and connectors. Such as GPIO, CSI, DSI, POE, and 40 Pins are reserved, which does not prevent other uses. Shell slot and port size designed to be accurate and the open design ensures that wifi/Bluetooth signal transmission is not affected.
- Aluminum Alloy Cooling Case x 1
- Dual Cooling Fan x 1
- 3W Silicone Pads(different size) x 4
- M2.5*10 Screws x 14
- Screwdriver x 1
- Installation Manual x 1