4 Port USB Hub for Raspberry Pi Zero/Zero W/3B+
This is a 4-port USB hub board for Raspberry Pi Zero/Zero W, and it can be mounted back-to-back onto a Pi Zero. Via a Micro USB to Micro USB Adapter, it connects to Pi Zero/Zero W without welding. Besides power, TXD, and RXD indicator, each USB port uses a red LED (D1-D4) as a working indicator. The 40 GPIO pins of Pi Zero/W are led for the better use of these pins.
The USB hub will take power directly from your Pi Zero/W, so you don't need to power the USB hub separately. If you use this USB hub with other types of computers, you can use the included USB cable to connect the on-board Micro USB port.
- Use for: Raspberry Pi Zero V1.3/Zero W
- Standards: USB 2.0 and 1.1 compatibility
- Working Voltage: 5V
- Size: 65mm × 30mm
- Fixed Holes Diameter: 3.0mm
- Wire Length: 128cm
- H B
- Micro USB Cable x 1
- Micro USB to Micro USB Adapter x 1