Rating:
100% of 100
Price $139.99
SKU
CZ0137
-
+


Description
The kit uses the SunFounder Nano board as control. A SunFounder Servo Control Board integrates battery, servo, Nano board, and nRF24l01 wireless modules together. This kit is equipped with a SunFounder Mobile Robot Remote Controller so that you can observe and control the robot remotely.

Note: The materials are not provided with a CD anymore. You may find them at
https://www.sunfounder.com/learn/category/arduino-crawling-robotv2.html 

Features
  • This is the Crawling Quadruped Robot Kit for Arduino. It includes everything you need to build a cool crawling quadruped robot with wireless remote control.
  • Powered by two 18650 rechargeable lithium batteries, it's a four-leg mobile robot and each leg has three joints driven by servos.
  • This kit is also equipped with a remote controller so that you can observe and control the robot remotely.
  • With the sample sketches provided, you can make the robot move forward, backward, left, and right or dance by remote control.
  • You can also make your own sketch to realize different movements.
Package List
  • Acrylic Plates x 1 pack
  • Calibration Chart x 1
  • Threaded Fasteners x 1 pack
  • nRF24l01 Module x 2
  • SunFounder Nano Board x 2
  • SunFounder Mobile Robot Remote Controller x 1
  • SunFounder Servo Control Board x 1
  • dual 18650 Battery Holder x 2
  • EMAX ES08AⅡ Analog Servo x 12
  • USB Data Cable x 1
  • Wire Harness Tube (80cm) x 1
  • Ribbon (50cm) x 1
  • Screwdriver x 1
Self-provided Parts
  • 18650 Rechargeable Li-ion Battery (3.7V) without protection circuit board x 4
Write Your Own Review
Write Your Own Review
Your Rating
Close
Product Inquiry
  1. By

    Price

    Quality

    Value

    Very very fun.
    Awesome product! Fun to make and play with. Be warned this is a precisiom robot with small parts that require careful handling. Don't torque down on screws hard, don't take it all terrain! Totally worth it! Bought some replacement servos because in my excitement after just having built this, I tried to take it over a huge hard cushion and broke off the head of one of the screws going into the shoulder servo horn connected to the "foot". Completely my fault. If you are clumbsyRead more or silly like me, buy a couple replacement servos.
    Update: the code is so well written, I'm having a blast modifying the code!
    helpful?
    0
    0

1 Item

Show per page