Rating:
100% of 100
Price $12.99
SKU
CN0041D
-
+

Description
This RAB Holder Kit provides you all the necessary components for a simple experiment, including a breadboard, quite a lot of jumper wires, a RAB holder, six LEDs, and six 1K current-limiting resistors, thus you can start the experiment right away.
With this kit, you can fix your Arduino board, Raspberry Pi, and breadboard on the RAB Holder, free of careless short circuits on a metal desk or caused by some metal parts underneath. What’s more, it also comes with 65pcs jumper wires with different lengths in various colors, therefore, you can just plug them into the control board and breadboard to build circuits, no bothering about complicated soldering.


Features

  • The Sunfounder breadboard kit fits perfectly for a Raspberry Pi 3B+, 3 Model B, 2 Model B and 1 Model B+ , an Arduino Uno or Mega 2560
  • The high-quality RAB Holder makes everything convenient and neat. Enlarge the fun when you fix the Raspberry Pi and Arduino boards.
  • This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails.
  • Including T-shape GPIO Extension Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B+, 3 Model B, 2 Model B, 1 Model B+
  • Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs, ten 1kΩ resistors, a screwdriver, and some screws.

Specifications
Size: 200 x 135 mm (7.87 x 5.31 inch)

Package List

  • RAB Holder x 1
  • 830-Point Breadboard x 1
  • Jumper Wire x 65
  • 20cm FC40 40pin Flat Rainbow Ribbon Cable x 1
  • 1kΩ Resistor x 10
  • Screwdriver x 1
  • T-Extension x 1
  • LED (3 red, 3 yellow, and 3 green) x 9
  • Screws(4 x M3*6 screws ,4 x PWM2*6 screw, 4 x PWM2*4 screws) x 12
Write Your Own Review
Write Your Own Review
Your Rating
Close
Product Inquiry
  1. By

    Price

    Quality

    Value

    Good quality, very handy.
    I wanted this to keep my projects in one piece until I'm done with them. Works great, good quality with threaded inserts for the screws - the bag of screws provided included a variety of sizes - the Raspberry Pi side has smaller-diameter screws than the Arduino side, and I had enough of both sizes. I assume the two long screws are for the non-threaded holes in the middle to fasten the plate itself to something or other. It even came with a cheap jeweler's screwdriver. The nice thing isRead more that unlike the other Arduino plates, this one holds a long breadboard. Great for breadboard projects I'm planning to have with my Raspberry Pi talking with my Arduino. I'm about to get another one.
    helpful?
    0
    0
  2. By

    Price

    Quality

    Value

    Bought this as an add-on item so I could more easily learn physical computing. Looked interesting an decided to give it a try. Arrived on time, is as described. Already have my Pi2 and breadboard attached and able to work in a more structured manner. This
    Bought this as an add-on item so I could more easily learn physical computing. Looked interesting an decided to give it a try. Arrived on time, is as described. Already have my Pi2 and breadboard attached and able to work in a more structured manner. This is a nice, sturdy product that will be a mainstay on my bench for time to come!
    helpful?
    0
    0
  3. By

    Price

    Quality

    Value

    Good quality, very handy.
    I wanted this to keep my projects in one piece until I'm done with them. Works great, good quality with threaded inserts for the screws - the bag of screws provided included a variety of sizes - the Raspberry Pi side has smaller-diameter screws than the Arduino side, and I had enough of both sizes. I assume the two long screws are for the non-threaded holes in the middle to fasten the plate itself to something or other. It even came with a cheap jeweler's screwdriver. The nice thing isRead more that unlike the other Arduino plates, this one holds a long breadboard. Great for breadboard projects I'm planning to have with my Raspberry Pi talking with my Arduino. I'm about to get another one.
    helpful?
    0
    0
  4. By

    Price

    Quality

    Value

    Absolutely brilliant!
    This breadboard holder is just superb! I love the versatility for mounting Pi, Uno, or Mega 2650 boards, and either full or half size breadboards. I've built similar breadboarding holders myself, but for the price and the precision of the mounting you can't beat this. My only wish, and I'll mention tis to Sunfounder, is that I'd like a similar one for mounting an Uno and a Mega 2650 because a lot of times I'll start a project on an Uno, run out of memory, then have to trRead moreansfer it to a 2650. I did find that I can mount an Uno on the left side where the Pi normally mounts and two of the holes line up on the Uno, so that may be sufficient for my needs. But even so, this is a fantastic device for prototyping projects on Pi's and Aurduinos, especially if you're interfacing the Pi and Arduino boards.
    helpful?
    0
    0

4 Item(s)

Show per page