SunFounder SG90 Micro Digital 9G Servo Motor for Helicopter Airplane Boat Robot Controls, 5 Pcs Pack

100% of 100
Price $23.99

The maximum torque of the clutch gear digital servo is up to 1.6KG. It rotates from 0-180 degrees. The mechanical limit angle is 360 degrees. You can control its angle by a potentiometer. The connection cable is 25cm long, the orange wire is the signal wire, brown, the ground, and red, the power. The servo works under the voltage of 4.8~6.0V.

  • Solid and Unbreakable with Double Protection: Well protected by Torsion protection, Power failure protection after overload.
  • Better Performance: A clutch gear DC core motor built inside the digital servo motor
  • Widely Used: ALL kinds of R/C Toys, Arduino, and Raspberry Pi Projects.Remote control helicopters, microrobot, robot arm and boats
  • No Load Speed: 4.8V, ≦0.14sec/60°; 6V, ≦0.12sec/60°. Note: Torsion protection:≥0.9 kgf·cm; Power failure protection after 5 seconds of continuous
  • Stall Torque: 1.4 kg/cm(4.8V), 1.6kg/cm(6V)
  • Motor Type: Core motor
  • Operating Voltage: 4.8~6V DC
  • Standby Current: ≤4 mA
  • Consumption Current (at 4.8V No Load): ≦50mA
  • Consumption Current (at 6 V no load): ≦60mA
  • Stall Current(at locked 4.8V): ≦550mA
  • Stall Current(at locked 6V): ≦650mA
  • Rated Torque: 4.8V, ≥0.6 kgf·cm; 6V, ≥0.7 kgf·cm
  • Max. Torque: 4.8V, ≥1.4; 6V, ≥1.6
  • No Load Speed: 4.8V, ≦0.14sec/60°; 6V, ≦0.12sec/60°
  • Note: Torsion protection:≥0.9;Power failure protection after 5 seconds of continuous
  • Operating Temperature Range: -10℃~+50℃
  • Storage Temperature Range: -20℃~+60℃
  • Operating Humidity Range: ≤ 90%RH
  • Storage Humidity Range: ≤ 90%RH
  • Weight: 10± 0.5g
  • Material: ABS 
  • Operating Angle: 180°±10°(500~2500us)
  • Mechanical Limit Angle: 360°
  • Left & Right Travelling Angle: ≤ 6°
  • Centering deviation: ≤ 1°
  • Back Lash: ≤ 4 us
  • Amplifier Type: Digital
  • Cable Material: Ф1.08,19 PVC
  • Cable Length: 245±5mm(Exsert without plugs)
  • Connector Type: JR2.54mm/3Pin
Package List
  • Mini SF006C Micro Servo Motor x 5
  • M2*8 Self-tapping screw
  • M1.7*3 screw
Reviews 1
Write Your Own Review
Write Your Own Review
Your Rating
Product Inquiry