SunFounder MARS Board-compatible with Arduino UNO R3

SunFounder MARS Board-compatible with Arduino UNO R3

US$15.99
SKU: TS0434

Availability: In stock

Quantily: - +
OR
Back to Top

SunFounder MARS Board-compatible with Arduino UNO R3

Features
SunFounder MARS is totally compatible with the official Arduino Uno, with also ATmega328P as processor, the same Optiboot bootloader as Uno, thus programmed with Arduino IDE
Uses FTDI232R for USB-to-serial and Type-C USB Port, more stable and reliable
All I/O ports with two pins (male and female), free to use - just plug Dupont wires regardless of M or F
Operating Voltage: 5V, Input Voltage: 7-12V (preferred 9V)
Adds a 5V power switch for convenience

Product Description

Details

Technical Details
Introduction
SunFounder MARS board is totally compatible with the official Arduino Uno board, with also ATMEGA328P as the processor, the same Optiboot bootloader as Uno.
Also it has 14 digital I/Os pins, 6 analog inputs, 32KB program storage, 16MHz crystal oscillator, etc.
Features that make it unique: beautiful red PCB, parallel yellow and red pins, colorful design; uses FTDI232R for USB-to-serial; adopts Type-C, so far the only USB port that supports reversible plug orientation; all I/O ports with two pins (male and female), free to use - just plug Dupont wires regardless of M or F; adds a 5V power switch to control the board power, which may be expected by mass hobbyists (switch off the board when not in use, avoiding frequent plugging); reset button at the board side for convenience; ATmega328P Microcontroller is packaged in patch which can save much space.

Parameters
* ATmega328P Microcontroller
* FTDI232R for USB-to-serial and Type-C USB Port
* Operating Voltage: 5V; Input Voltage: 7-12V (9V preferred)
* Parallel male and female I/O Pins
* 5V power switch to control the board power
* 14 digital I/Os Pins (6 ports support PWM output)
* 6 analog Inputs
* ICSP port for bootloader
* 32KB program storage (0.5KB for bootloader)
* 2KB RAM
* 1KB EEPROM
* 16 MHz crystal oscillator
* Output: 5V, 3.3V input compatible
* Compatible with all peripheral modules for Arduino Uno R3

Package included:
1 * SunFounder Mars Board (Arduino compatible)

For more information, refer to: https://www.sunfounder.com/wiki/index.php?title=SunFounder_MARS_Board#Open_the_IDE

Additional Information

Additional Information

Name SunFounder MARS Board-compatible with Arduino UNO R3
Free Shipping No
UPC 717760736079
  • Review
1 (100.0%)
0 (0%)
0 (0%)
0 (0%)
0 (0%)
  • Quality
  • Value
  • Price
Looking for Arduino UNO development boards? Look no further! By LaCu 2016-06-03 10:03:20

Appears to be a very high quality board with enough outputs and inputs to accomplish the project I intend to use it for. I don't think that it would be possible to beat the price. I was able to program it with the initial blinking light program and test all three boards. They all worked fine. Also have interfaced the 4 line by 20 character LCD display with it and it worked fine. So no bad boards were shipped. I'm really pleased with this purchase. The boards were packaged very well in antistatic bags and then in very sturdy card board boxes.

How do you rate this product? *
Price
Value
Quality
  •  
  •  
  •  
  •  
  •  
  •  
      validation code  Unclear? Click the picture to replace the verification code