Arduino Project

Arduino Bird Game on LCD 1602

Kit purchase

Looking for parts? Check out our all-in-one kits below — packed with components, beginner-friendly guides, and tons of fun.

2.webp__PID:7d088a16-8752-49fb-8b1f-f9bba7297987

Name	Includes Arduino board	PURCHASE LINK
Elite Explorer Kit	Arduino Uno R4 WiFi	BUY
3 in 1 Ultimate Starter Kit	Arduino Uno R4 Minima	BUY
Ultimate Sensor Kit	Arduino Uno R4 Minima	BUY
Universal Maker Sensor Kit	×	BUY

Course Introduction

This Arduino project lets you play a simple dinosaur running game using a 1602 LCD, a button, and a passive buzzer.

The game displays obstacles and a bird character on the LCD. Press the button to make the bird jump and avoid obstacles.

Each successful dodge increases your score, while collisions reduce your lives. The buzzer sounds for each collision, and your final score is shown when the game ends.

Note

If this is your first time working with an Arduino project, we recommend downloading and reviewing the basic materials first.

1.1 Install Arduino IDE(Important)
1.2 Introduction of Arduino IDE

Required Components

In this project, we need the following components:

SN	COMPONENT INTRODUCTION	QUANTITY	PURCHASE LINK
1	Arduino UNO R4 WIFI	1	BUY
2	USB Type-C cable	1	×
3	Breadboard	1	BUY
4	Wires	Several	BUY
5	I2C LCD 1602	1	BUY
6	Button	2	BUY
7	Passive buzzer	1	BUY

Wiring

3.png__PID:3dc9a668-4f9d-4204-942a-782a974f9c25

Common Connections:

I2C LCD 1602
SDA: Connect to A4 on the Arduino.
SCL: Connect to A5 on the Arduino.
GND: Connect to breadboard’s negative power bus.
VCC: Connect to breadboard’s red power bus.

Passive Buzzer
＋: Connect to 9 on the Arduino.
－: Connect to breadboard’s negative power bus.

Button
Connect to breadboard’s negative power bus.
Connect to 3 on the Arduino.

Button
Connect to breadboard’s negative power bus.
Connect to 6 on the Arduino.

Writing the Code

Note
You can copy this code into Arduino IDE.
To install the library, use the Arduino Library Manager and search for LiquidCrystal I2C and install it.
Don’t forget to select the board(Arduino UNO R4 Minima/WIFI) and the correct port before clicking the Upload button.

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

#define BUTTON_PIN 3      // jump button pin
#define RESTART_PIN 6     // restart button pin
#define BUZZER_PIN 9      // buzzer pin
#define BIRD_X 5          // fixed bird column

LiquidCrystal_I2C lcd(0x27, 16, 2);

// custom character IDs
#define BIRD_CHAR   0
#define PIPE_CHAR   1
#define HEART_CHAR  2

// custom character data: bird, pipe, heart
byte birdChar[8] = {
  0b00000,
  0b00000,
  0b00110,
  0b10111,
  0b10110,
  0b11110,
  0b11110,
  0b01100
};
byte pipeChar[8] = {
  0b11111,
  0b11111,
  0b01110,
  0b01110,
  0b01110,
  0b01110,
  0b01110,
  0b01110
};
byte heart[8] = {
  0b00000,
  0b01010,
  0b11111,
  0b11111,
  0b01110,
  0b00100,
  0b00000,
  0b00000
};

// game state
bool isUp = false;        // bird position flag
bool gameOver = false;
int lives = 3;            // starting lives
int distance = 0;         // frame counter
int hundreds = 0;         // hundreds digit for score
int totalSteps = 0;       // total score

// obstacle positions
int obstacleX1, obstacleX2, obstacleX3;
int oldObstacleX1, oldObstacleX2, oldObstacleX3;

// speed control
int obstacleSpeed = 200;  // initial frame delay
const int minSpeed = 120;
const int speedIncrement = 20;

int oldPlayerRow;         // last bird row

void setup() {
  lcd.init();             // initialize LCD
  lcd.backlight();        // turn on backlight

  // load custom characters
  lcd.createChar(BIRD_CHAR, birdChar);
  lcd.createChar(PIPE_CHAR, pipeChar);
  lcd.createChar(HEART_CHAR, heart);

  pinMode(BUTTON_PIN, INPUT_PULLUP);
  pinMode(RESTART_PIN, INPUT_PULLUP);
  pinMode(BUZZER_PIN, OUTPUT);

  randomSeed(analogRead(A0) ^ micros());
  startGame();            // reset game
}

void loop() {
  // check restart button
  if (digitalRead(RESTART_PIN) == LOW) {
    startGame();
    delay(200);
    return;
  }

  // read jump button
  isUp = (digitalRead(BUTTON_PIN) == LOW);

  if (!gameOver) moveObstacle();  // run game frame
}

// pick number of pipes with probability
int pickCluster() {
  int r = random(10);
  if (totalSteps >= 100) {
    if (r < 5) return 1;       // 50% single
    else if (r < 8) return 2;  // 30% double
    else return 3;             // 20% triple
  } else {
    if (r < 2) return 1;       // 20% single
    else if (r < 6) return 2;  // 40% double
    else return 3;             // 40% triple
  }
}

void startGame() {
  // reset variables
  isUp = false;
  gameOver = false;
  lives = 3;
  distance = 0;
  hundreds = 0;
  totalSteps = 0;
  obstacleSpeed = 200;
  oldPlayerRow = 1;

  // initial obstacle cluster
  int cluster = pickCluster();
  obstacleX1 = 13;
  obstacleX2 = (cluster >= 2) ? 14 : -1;
  obstacleX3 = (cluster >= 3) ? 15 : -1;
  oldObstacleX1 = obstacleX1;
  oldObstacleX2 = obstacleX2;
  oldObstacleX3 = obstacleX3;

  // show start screen
  lcd.clear();
  lcd.setCursor(0, 0);
  lcd.print(" Bird Run 16x2 ");
  lcd.setCursor(0, 1);
  lcd.print(" Press BTN...  ");
  delay(1000);
  lcd.clear();
}

void moveObstacle() {
  static unsigned long lastTime = 0;
  unsigned long now = millis();
  if (now - lastTime < obstacleSpeed) return;
  lastTime = now;

  // clear old pipes
  if (oldObstacleX1 >= 0) lcd.setCursor(oldObstacleX1, 1), lcd.write(' ');
  if (oldObstacleX2 >= 0) lcd.setCursor(oldObstacleX2, 1), lcd.write(' ');
  if (oldObstacleX3 >= 0) lcd.setCursor(oldObstacleX3, 1), lcd.write(' ');

  // update score
  distance++;
  if (distance > 99) {
    distance = 0;
    hundreds++;
  }
  totalSteps = hundreds * 100 + distance;

  // activate second pipe after 100
  if (totalSteps >= 100 && obstacleX2 < 0) obstacleX2 = 16;

  // move pipes left
  if (obstacleX1 >= 0) obstacleX1--;
  if (obstacleX2 >= 0) obstacleX2--;
  if (obstacleX3 >= 0) obstacleX3--;

  // regenerate cluster when first pipe off-screen
  if (obstacleX1 < 0) {
    int cluster = pickCluster();
    obstacleX1 = 13;
    obstacleX2 = (cluster >= 2) ? 14 : -1;
    obstacleX3 = (cluster >= 3) ? 15 : -1;
    if (obstacleSpeed > minSpeed) {
      obstacleSpeed -= speedIncrement;
      if (obstacleSpeed < minSpeed) obstacleSpeed = minSpeed;
    }
  }

  // update lives display
  for (int i = 0; i < 3; i++) lcd.setCursor(i, 0), lcd.write(' ');
  for (int i = 0; i < lives; i++) lcd.setCursor(i, 0), lcd.write(byte(HEART_CHAR));

  // draw bird
  int playerRow = isUp ? 0 : 1;
  if (playerRow != oldPlayerRow) {
    lcd.setCursor(BIRD_X, oldPlayerRow);
    lcd.write(' ');
  }
  lcd.setCursor(BIRD_X, playerRow);
  lcd.write(byte(BIRD_CHAR));
  oldPlayerRow = playerRow;

  // draw pipes
  if (obstacleX1 >= 0) lcd.setCursor(obstacleX1, 1), lcd.write(byte(PIPE_CHAR));
  if (obstacleX2 >= 0) lcd.setCursor(obstacleX2, 1), lcd.write(byte(PIPE_CHAR));
  if (obstacleX3 >= 0) lcd.setCursor(obstacleX3, 1), lcd.write(byte(PIPE_CHAR));
  oldObstacleX1 = obstacleX1;
  oldObstacleX2 = obstacleX2;
  oldObstacleX3 = obstacleX3;

  // draw score
  lcd.setCursor(14, 0);
  lcd.print(hundreds);
  lcd.setCursor(14, 1);
  lcd.print(distance / 10);
  lcd.setCursor(15, 1);
  lcd.print(distance % 10);

  // collision check
  if ((obstacleX1 == BIRD_X || obstacleX2 == BIRD_X || obstacleX3 == BIRD_X) && !isUp) {
    lives--;
    tone(BUZZER_PIN, 200, 200);
    delay(250);
    noTone(BUZZER_PIN);
    if (lives <= 0) {
      gameOver = true;
      endGame();
    }
  }
}

// end game: show message then play melody
void endGame() {
  lcd.clear();
  lcd.setCursor(2, 0);
  lcd.print("GAME OVER!!!");
  lcd.setCursor(1, 1);
  lcd.print("Steps: ");
  lcd.print(totalSteps);

  tone(BUZZER_PIN, 400, 100);
  delay(150);
  tone(BUZZER_PIN, 600, 100);
  delay(150);
  tone(BUZZER_PIN, 800, 150);
  delay(200);
  tone(BUZZER_PIN, 600, 150);
  delay(200);
  tone(BUZZER_PIN, 400, 200);
  delay(250);
  noTone(BUZZER_PIN);
}

Recover password

Create my account

Arduino Project

Arduino Bird Game on LCD 1602

Kit purchase

Course Introduction

Required Components

Wiring

Common Connections:

Writing the Code

Arduino Project

Arduino Bird Game on LCD 1602

Kit purchase

Course Introduction

Required Components

Wiring

Common Connections:

Writing the Code

Subscribe to our newsletter