SunFounder 7'' Raspberry Pi HDMI touch screen with a new upgrade version to support Raspberry Pi 4 Model B, 3 Model B+/B, 2 Model B, 1 Model B+. It's a very portable touchscreen monitor with a lightweight high resolution with 1024x600 pixel, adapted IPS LCD screen to achieve wide viewing angle HD picture effect. In addition, this raspberry pi touch display touch area nearly reaches the screen boundary, much better than 85% the same screen in the market.
- HD VISUAL ENJOYMENT: SunFounder RPi touchscreen with HD 1024x600 resolution, 16.7M(8bit) color numbers give high color restore the display. Rectangular ratio 16:9 display format conversion. IPS 170° full wide viewing angle gives you a crystal-clear viewing experience of all your content.
- MULTIPLE APPLICATION: Supports Raspbian/Win7/Win8/Win10(Plug and play), Android/Linux (need to be configured first). And you can download Installation Manual for Raspberry Pi from the selling page. ( Note: the HDMI-Micro HDMI cable especially for Raspberry Pi 4, HDMI-HDMI cable for Raspberry Pi 3)
- LOW COMSUMPTION：Low power consumption and have a good effect connect with a Windows computer, no trouble with installing drivers for various systems.
- WIDE TOUCH AREA: The module size with 165.30(W)*121(H)*7.75(T), and the Active area is 154.21(mm)*85.92(mm). Most of the screens on the market will have this touch problem if the software is not adjusted, but this small HDMI screen no worries to reach the side of the screen.
- PLUG & PLAY: Equip with Micro USB and HDMI port support. Connect the screen to a device via the HDMI interface and power it via USB. To achieve the touch function powered by USB, do not require power cord and drive-free.
- Screen Size: 7 inches
- Item Dimensions: 165.30（W)*121(H)*7.75(T)
- Viewing angle: 170°
- Brightness: 250cd/m2
- Aspect Ratio: 16:9
- Display mode: Touchpad
- Interface type: USB，HDMI
- Backlight: White LED
- Operating Temperature: -10°C~60°C
- Storage Temperature: -20°C~70°C
- Interface: Digital
- Display Resolution Maximum: 1024 × 600
- Display Type: IPS LCD
- Color Numbers: 16.7M
- Input Signal: HDMI
- Power: USB(5.0V)
- Consumption: 480(Typ.) mA
- Operating Voltage: 5V
- Rated Power: 480mA
- System: Raspbian/Win7/Win8/Win10(Plug and play), Android/Linux (need to be configured first)
- 7 Inch IPS Touch Screen x 1
- Micro USB Cable x 1
- HDMI-HDMI Cable x 1
- HDMI-Micro HDMI Cable x 1
- M3 Nuts x 4
- M3*8 Copper screws x 4